Search results

Furkill, Here in the USA, eGolf came one of two ways... 1. J1772 connector 2. J1772 + CSS (DC Fast) CSS was omitted from some eGolf models here in the USA. 3.7KW/H L2 charging was a limitation of vehicles such as the Chevy Volt. But I've never seen an eGolf with a 3.7KW/H L2 limited charger...

If you drive and take 10KWh out of the battery, charging it will take approx 110% (11KWh). This is due to charging losses. So if you use regenerative braking and place energy back in the battery (charge), you immediately lose about 10%. In summary, any time you can coast rather than take...

Nope it’s not. It goofed and zeroed again today Barry

Nope....... it zeroed the since charge number today. So maybe less often. But not a total fix. Barry

Have you tried recalibrating all windows? Not sure it’ll help, but it’s easy to do. Barry

Yep....... it’s fixed

Yep I can confirm...... it’s fixed

SUMMARY 2017 model, leased in 2018, SEL DAP I drive to work 8am, I drive home 5pm, I charge overnight. Description The Miles/KW Since Charge does funny things... During the day at work, M/KW Since Charge sometimes resets itself, despite no charging having taken place. In the morning after a...

SUMMARY 2017 model, leased in 2018, SEL DAP I drive to work 8am, I drive home 5pm, I charge overnight. Description The Miles/KW Since Charge does funny things... During the day at work, M/KW Since Charge sometimes resets itself, despite no charging having taken place. In the morning after a...

Here is a quick test. By default the 12V "cigarette lighter" sockets go OFF with the ignition. There are two of them... the other is in the trunk, right side, high up, IIRC. But you can move a fuse and override this behavior. Has your fuse been moved to change the default OFF with ignition...

Sounds like it was damaged by vandalism. I suspect if you look at your charging records you can determine where and when it happened for your insurance company. Barry

Before you run back to the dealer.... The device outside the car is called the EVSE. The actual charger is inside the car. The EVSE informs the car of the amount of power the EVSE is prepared to provide. The charger in the car takes this information and ensures that power consumption during the...

Electric windshield heater is turned on by using the “Menu” button at bottom of infotainment then clicking onscreen the windshield icon. Barry

The JuiceBox Pro is able to limit the KWH sent to the car in a session. They list it as a given number of miles. Are you sure you have the setting cranked all the way clockwise in the JB app? Barry

WARNING: I may be stating the obvious! In order to stop iPhone contents being viewed by 3rd party organizations (the government & police) Apple made a change. The USB port only remains active for a few mins after the phone is locked. You can charge the phone after this time limit, but no data...

Dear Manybees, I surrender. You are indeed correct and doing what is in the best interest to your home. I however would have no issue in my home with a 40Amp eMotorWerks Juicebox 40 EVSE (yes 10KW capable) connected to a 30Amp eMotorWerks adaptor, assuming the 30Amp socket used is suitably...

Rd7575 These chargers can only tell voltage. When plugged into an adapter to permit utilizing a circuit of lower current capability, it is the responsibility of the user to configure either car or EVSE to limit the current drawn. Barry

My tip is.... remember Regen is not really your friend. Any energy you use and remove from the battery, will lose a percentage if you Regen it back into the battery. There will be inefficiency losses. Just recharging a battery takes about 110% of what you took out. I can’t prove it, but I...

If that be true... then how can Emotorwerks (manu for JuiceBox) sell adaptors to change the 240V 40A plug on the JB to a smaller amperage plug. They offer two 30A plugs and hell they even sell a 115V 15A adaptor << that's a clickable link to the product page. I really think you should check...

The maximum current from a device set to 16Amps is......... 16Amps. Else the breaker pops to protect the wiring. Are you sure about the code needing 40A ? Barry